Insulation Components, Inc/

360° Calcium Silicate Saddles

Product Data Sheet

DESCRIPTION

 An INSULATION COMPONENT 360° Calcium Silicate Saddles  are 360° thermal hanger
shields designed to meet the broadest range of pipe support applications. They provide a
continuous section of insulation and vapor barrier through a wide variety of pipe hangers 
for pipe systems operating between 20°F and 1200°F. The insulation and vapor barrier
extend beyond the galvanized steel shield for a neat, vapor-tight joint with the adjoining
insulation.Insulation Components 360° Calcium Silicate Saddles are suitable for use in
any type of clamp as well as in band-type hangers and on flat surfaces. To assure proper
support in all situations, high density 450 PSI inserts are installed in units for 10" pipe
with 1" wall thickness and in all units for 12" pipe and larger. Insulation Component 360°
Calcium SilicateSaddles meet the MSS standard for a Type 40 shield per MSS SP-58,
Paragraph 9.2.2.  

FEATURES

MATERIALS / CONSTRUCTION

• 135 PSI Calcium silicate meeting ASTM C-533, C-585, C-795, E-84, Flame Spread -0-, Smoke Developed -0-, Thermal Conductivity ("k") .40 @ 75° F mean.
• Adhesive complying with NFPA 90-A, ASTM E-84, Flame -10-, Smoke -0-.
• G-90 Galvanized steel shield, small check per ASTM A-527.
• Vapor Barrier of all service jacket meeting ASTM D-774, D-828 and E-84, Flame -5-, Smoke -5-.
• Structural insert (12" pipe and larger) minimum 450 PSI calcium silicate meeting ASTM C-533, C-795 and E-84, Flame -0-, Smoke -0-
• All units and components are asbestos free and are 100% made and assembled in the U.S.A.

APPLICATIONS

• For indoor use on clamping support systems, flat surfaces, clevis or other band-type hangers 
• Pipe sizes 16 inch and larger in clevis or two bolt hangers only.
• Chilled to steam piping and dual temperature lines.
• Hanger spans per MSS SP-69 Table 5.
• Available for pipe from ½ inch through 30 inches.
• Insulation thickness from ½ inch through 4 inches.

ENGINEERING GUIDE SPECIFICATION

WHEREVER PIPE INSULATION PASSES THROUGH A HANGER LOCATION, THE IC 360° CALCIUM SILICATE SADDLES SHALL BE INSTALLED.  ALSO EACH THERMAL SADDLE SHALL BE  MARKED BY THE  O.D. OF THE PIPE INSULATION.

360° Calcium Silicate Saddles Sizing Chart