360° Polyisocyanurate Saddles

Our Products

Insulation Pipe Saddles
Insulated Saddles
Pipe Insulation Spacers
Tools and Equipment

DESCRIPTION

An INSULATION COMPONENT 360° Polyisocyanurate Saddles are designed to meet
a broad range of pipe support applications on low temperature lines. They provide a continuous
section of insulation and vapor barrier, and are designed for pipe systems operating between
–250° F. The insulation and vapor barrier extend beyond the galvanized steel shield for a neat,
vapor-tight joint with the adjoining insulation. 360° Polyisocyanurate Saddles are suitable for
use in any type of clamp as well as in band-type hangers. High-compressive strength
polyisocyanurate inserts and heavy gauge steel shields ensure proper pipe support. These
cost affective designs meet the requirements of either pipe or tube systems.

FEATURES

MATERIALS / CONSTRUCTION

360° Polyisocyanurate, either 80 PSI (Flame Spread -15-, Smoke Developed -360-, Thermal Conductivity ("k") .19 @ 75° F mean) or 140 PSI (Flame -15-, Smoke -550-, Thermal Conductivity ("k") .20 @ 75° F mean) meeting ASTM D-1621, D-1622, D-1623, C-203, C-518, E-96 and E-84.
360° Non-reactive vapor barrier jacket meeting ASTM D-774, D-828 and E-84, Flame -5-, Smoke-5-.
Adhesive complying with NFPA 90-A and ASTM E-84, Flame -10-, Smoke -0-.
360° G-90 Galvanized steel shield, small check per ASTM A-527.
All units are Asbestos-free and are 100% made and assembled in the U.S.A.

APPLICATIONS

For indoor use on clamping support systems, clevis or other band type hangers.
Chilled piping to domestic hot water.
Chilled to steam piping and dual temperature lines.
Hanger spans per MSS SP-69 Table 5. ( Not Suitable for extended hanger spans )
Available for pipe from 1/2 inch through 30 inches.

ENGINEERING GUIDE SPECIFICATION

WHEREVER PIPE INSULATION PASSES THROUGH A HANGER LOCATION, THE IC 360° POLYISOCYANURATE SADDLES SHALL BE INSTALLED. ALSO EACH THERMAL SADDLE SHALL BE MARKED BY THE O.D. OF THE PIPE INSULATION.