Insulation Components, Inc/

360° Polyisocyanurate Thermal Saddles

DESCRIPTION

 An INSULATION COMPONENT 360° Polyisocyanurate Thermal
Saddles  are similar to 360° Polyisocyanurate Saddles.  Both are 360° units
designed for low temperature systems.  The  360° Polyisocyanurate
Thermal Saddles incorporates a vapor barrier jacket to match lines
insulated with elastomeric rubber (‘Armaflex’) or  polyethylene-type
insulation materials.  Both the 360° Polyisocyanurate Saddles and 
360° Polyisocyanurate Thermal Saddles use high density/ high compressive
strength polyisocyanurate  inserts and have an exterior jacket designed to
match the adjoining insulation.  The 360° Polyisocyanurate Thermal
Saddle units are suitable for use in any type of clamp as well as in all
band-type hangers.

FEATURES

MATERIALS / CONSTRUCTION

• 360° Polyisocyanurate, 24 PSI to 140 PSI – Meeting ASTM C-203, C-518, C-585, C-795, D1621, D-1622, D-1623, and E-84.  Flame Spread/ Smoke Developed  -25/450
• High Compressive Strength Inserts, 375 PSI Standard For Pipe 14” and Larger, Meeting ASTM C-585, C-795.
• Zero Perm Vapor Barrier Jacket VentureClad 1577 CW/B. Meets ASTM E-96, UL 723 Flame Spread –10-, Smoke                            
• Developed –20-.
• Adhesive Complying to NFPA 90-A and ASTM E-84, Flame Spread –10-, Smoke Developed –0-.
• G-90 Galvanized steel shield, small check per ASTM A-623 (replaces A-527)
• All units are Asbestos-free and are 100% Made and Assembled in the U.S.A.

APPLICATIONS

• For indoor use on clamping support systems, clevis or band-type hangers.
• Low Temperature tubing systems to minus 250° F.
• Hanger spans per MSS SP-69 Table 5.
• Available for pipe from 1/2 inch through 24 inches.

ENGINEERING GUIDE SPECIFICATION

WHEREVER PIPE INSULATION PASSES THROUGH A HANGER LOCATION, THE IC 360° POLYISOCYANURATE THERMAL SADDLES SHALL BE INSTALLED.  ALSO EACH THERMAL SADDLE SHALL BE  MARKED BY THE  O.D. OF THE PIPE INSULATION.

360° Polyisocyanurate Thermal Saddles Sizing Chart